This article gives a basic overview of the major differences between FreeBSD and Linux with regards to IP networking, application installs, and starting/stopping services. The assumption is the reader has a good basic understanding of Linux to start of with. We will cover three areas: 1) IP networking, 2) package installation, and 3) starting/stopping services both manually and automated.
I have covered IP settings in previous articles pertaining to Centos and Debian. Debian uses the /etc/system/interfaces file, and Centos uses the /etc/sysconfig/networking-scripts/if-eth0 file.
FreeBSD is different. Everything is in /etc/rc.conf – not just IP settings but everything pertaining to the entire system is in /etc/rc.conf. Thats sounds great right? Basically, FreeBSD has /etc/defaults/rc.conf which contains everything for default settings, but whatever it sees in /etc/rc.conf at bootup overrides the default. Here is the sample rc.conf syntax for basic IP settings:
ifconfig_em0="184.108.40.206 netmask 255.255.255.0 up"
And for IPv6 add the additional lines:
In this case our network interface is em0 – we know that from bootup or by looking at the output of dmesg command. Name resolution is still controlled by /etc/resolv.conf as it is in Linux. If you want to add IPv4 aliases, the rc.conf syntax is:
ifconfig_em0_alias0=”220.127.116.11 netmask 255.255.255.255″
ifconfig_em0_alias1=”18.104.22.168 netmask 255.255.255.255″
ifconfig_em0_alias2=”22.214.171.124 netmask 255.255.255.255″
Software Package Installation
In Linux, apt-get and yum are the common tools for adding packages. FreeBSD has a completely different way of doing this. There are two main ways to add software packages: 1) the ports repository, or 2) the sysinstall utility.
The ports repository is a large directly/file tree located in /usr/ports – under that directory there are categories, like /usr/ports/databases, and within the category directory you will find the individual packages, like /usr/ports/databases/mysql51-server. The install the package you go into the packages directory (i.e. /usr/ports/databases/mysql51-server) and run “make && make install”. This will download the most recent tarball, applying system specific patches, compile, and then install the package. If the package has configurable options, a TEXT GUI will pop-up asking you to make those optional selections.
Obviously, the ports to work you need to have the most recent /usr/ports or even have it at all. If you did not install it when creating the system, you can always add it later using the sysinstall utility – /usr/sbin/sysinstall.
sysinstall is a TEXT GUI system that allows you to do many things (too many for me to describe), one of those things is adding distributions. If you dont have /usr/ports installed, go into sysinstall, select “Configuration”, then select “Distributions”, then scroll down and select “Ports”. When you continue from there, it will ask where to install from and you can select the FreeBSD FTP servers to install over the network.
While inside the sysinstall utility you may notice that the utility itself can be used to install software packages. From the main screen, select “Configure”, then select “Packages”. You can now browse through the same category tree and select, for example, Databases -> Mysql 5.1 Server. When you continue through the process, you will again be asked from where to install and you can select the FreeBSD FTP servers.
A sysinstall package add is different then a ports add because the package is not compiled, rather, a pre-compiled package is downloaded and installed.
System Services – Starting, Stopping, Automation
Lastly, how do you start and stop services and set services for automatic start at bootup? Again, this is vastly different then Linux methods, but again, its all covered in /etc/rc.conf. First, the actual scripts for starting and stopping services that have been been added via ports or the sysinstall package system will always be located in /usr/local/etc/rc.d – the exception being core OS services which are located in /etc/rc.d – things like nfsserver or sendmail (on FreeBSD sendmail is a core base service).
So if you have installed apache22, starting and stopping is done by:
What about automation? That is done in rc.conf as follows:
99% of the time the name of the script located in /usr/local/etc/rc.d is the syntax for the above _enable statement, but there are cases where it differs. To be sure, open up the init script located in /usr/local/etc/rc.d and look for its “name” directive which is located near the top. The name is the service name. Oddly enough, mysql is a culprit of this. The mysql service name is mysql, but the init script in /usr/local/etc/rc.d is named mysql-server, so if you added mysql-server_enable=”YES” to /etc/rc.conf it would not work, it has to be mysql_enable=”YES”.